Tag Archives: smart stick

BOOMco Rapid Madness Review

A couple of weeks ago I posted a loadouts post that happened to mention the Rapid Madness, and yesterday, I realized that I hadn’t published an official review of it. And man, does this thing deserve a review or what! Let’s dive right into this red-blue beast!

The Box



Now I know that this section is kinda obsolete, but it represents how BOOMco is presenting it’s products to the people. When I walk into a toy store, the product needs to catch my attention, and I must say, BOOMco’s packaging is pretty sweet. A big box(about 30 inches across),open-faced, lots of panels sticking out, a good mix of black and red, count me impressed.

Now a few things that got my attention are the decreased range claims(45 feet rather than 50 feet), lack of the BOOMco round, and the new way of opening the box(there’s a panel on the back side that you rip off.). This leads me to believe that this is a second generation, Asian release of the Rapid Madness(the instructions were in Mandarin, Japanese, Malay, Thai and English). Because Asian countries do not have any restrictions on toy blasters, I wonder why was the range decreased. We’ll see that in the range test. In a word, the box looks fun, and so does the blaster.



Inside the box, you get the Rapid Madness, a 20 dart clip, a smart-stick shield for the blaster, 30 darts, a 12×9 inch smart stick target and a few stickers(which I really like). The target has an adhesive backing so that you can stick it where you want to. I got the Rapid Madness on a lightning sale for INR 1000(about $15),although it retails for about INR 2499.

First Impressions and Aesthetics


Once fully assembled, the blaster feels adequately sized for adults and kids alike. The handle feels nice in my big hands, so I see no problem for kids in holding the blaster, although I guess it’ll be a tad bit heavy for them. The embossed logo, matte paint finish and the unique colouring adds a unique look to the blaster, one not found in Nerf blasters.

The embossed logo, matte paint finish and the unique colouring adds a unique look to the blaster, one not found in Nerf blasters.

Going over to the aesthetics, It could’ve been a really, really comfortable blaster if not for one little flaw. The pump grip is really nice, offering a natural place to hold the blaster, and the cheek rest is comfortable enough. However, the handle’s thumb rest rises sharply and constantly rubs against my skinny hands. It might not seem as a major design flaw, but when you play for an hour or so, your knuckle will get sore and will sting a little.

Now another thing that can be an issue for younger players is pumping the blaster. I took a few measurements and found out that on full draw, the distance between the pump handle and my shoulder was 29 inches. So make sure you can pull the pump handle far enough. Also, the last few pumps requires some effort to be pumped,. That might not be a problem for an athletic adult like me, but it might be an arduous task for the kids.

Performance and Use

To fire the blaster, pump it 16 times(the over pressure release valve kicks in at 18 pumps), load the clip, and let it rip.


I fired the blaster 3 times from shoulder height, parallel to ground and 3 times angled to ground, at about 30 degrees. I also counted the number of shots landing in each category based on range. Given below are 2 tables, which are the average of 3 parallel firing tests and 3 angled firing tests respectively.

Parallel to Ground

High shots- 37 feet – 4/20 shots reached this range

Average shots- 33 feet – 10/20 shots reached this range

Below Avg. shots- 28 feet – 4/20 shots reached this range

Low Shots- 24 feet – 2/20 shots reached this range

Angled to Ground  

High shots- 51 feet – 6/20 shots reached this range

Average shots- 44 feet – 8/20 shots reached this range

Below Avg. shots- 40 feet – 4/20 shots reached this range

Low shots- 37 feet – 2/20 shots reached this range

Rate of Fire

Again, the blaster was fired three times, and an average of three variables is given below. time was measured from trigger pull to last dart fired.

Time taken to empty a full 20 dart clip- 1.60 seconds, thus,

Rate of fire= 12.5 darts/second


From 25-30 feet in a closed environment, I found 9-10 inch dart groupings when fired flat(thanks to smart stick). Darts tend to stay down the line when the shot is angled, owing to their better dart design. Accuracy might not be what the manufacturers were aiming for, but its way better than any Nerf blaster. I gotta say, these smart stick darts, they stick, and they stick good. Also, since they don’t have that weird hole in the front like the elite dart, they fly pretty accurately, accurate enough to use optics, I guess.

Overall Opinion


I have to hand it to BOOMco, for their first attempt at making a blaster, this is pretty cool. The Rapid Madness does what it’s meant to do, and that is obliterate. The rapid fire flurry of darts(which is faster than 1st Gen. models) is just impossible to dodge, the darts stick extremely well, and the blaster lives up to it’s range claims, which is a first for me. I’m impressed with this blaster, if not completely sold. There are a few kinks to work out, but that can be overlooked when you have a blaster this good. It definitely gets a ‘BUY IT!’ recommendation from me. Comment, like and follow if you liked my review! Till then, see ya!

Mattel answers Nerf with BoomCo Blasters.

The world’s largest toy manufacturer Mattel is ready to lock horns with the blaster biggies Hasbro(Nerf),as it reveals its upcoming line of blasters,which will be released in summer 2014.

The new blasters,named BoomCo,feature 70ft ranges and darts with “Smart Stick” technology.The following blasters have been specified for future release-

1)Twisted Spinner

2)Rapid Madness



5)Bandolier, Goggles and other accessories.

The future for BoomCo actually looks bright,given the fact that the sheer supremacy of Mattel over the toy market will guarantee huge sales from the name alone.

Photo Courtesy-Adult Fans Of Nerf

The darts have some sort of a sticky substance at the tip,which will make them stick to any material,including fabric.The big blaster shown below seems to have an air-pump mechanism(full auto fire,maybe),while the smallest one has a slide to fire.

boomcoPhoto Courtesy-Adult Fans Of Nerf

Overall,the build quality looks very good,given that Mattel has been known to produce high quality toys.This might be one of the most eagerly awaited non-Nerf brand blaster this summer,although Tek Recon,Buzz Bee and other manufacturers also have some tricks up their sleeve.

You can also look up the official website here-http://www.boom-co.com/

BlasterLabs and Adult Fans of Nerf also have coverage on this news,see their websites here-